Wednesday, September 21, 2011

Tidalforce Wavecrest Front Hub Disassembly Part 4

With the help of the good folks on I was able to loosen the 4 slotted nut holding the axle together and preventing me from removing the NiMH cells. I used a large hammer and a large screwdriver to loosen the nut. I started gently and moved around the 4 slots to try and distribute the energy. In about 3 minutes, I had the nut off!

Now I need to measure the space available and see what will fit into the space. I hope it's a at least 10aH of LiPO! More later, Ambrose

No comments:

Post a Comment