Friday, June 29, 2012

HP 600B Power Supplies Modified (slightly)

I took a few minutes to open up the 575W 12V HP server power supplies to remove the handles last night. It was fairly easy to do. All it takes is a big screwdriver to pry them off.

Unscrew 7 screws along the top right and side of the power supply...

Put a large screwdriver under the metal tab.

Gently pry until the two connecting points pop off. You can then either file down the sections that remain on the side cover or do as I do and just leave the little burrs there since it doesn't really move or cause any problems.

No comments:

Post a Comment