Friday, October 23, 2009

The Blinder is done!

I finally (with some help) figured out how to solder the wires to the driver board and The Blinder now works! I've posted a video here:

http://picasaweb.google.com/ambroseliao/TheBlinderWorks#5395631406943924498
or
http://tinyurl.com/ylo7oml


Here it is sitting on the battery case. I need to come up with a water proof case for the LEDs and driver board.





More later,
Ambrose

2 comments:

  1. Hi Ambrose

    Nice tail light,I have a couple of questions. Did you get the driver from Deal Extreme?
    Are you going to put the LED's on a heatsink?

    Take care Steve

    ReplyDelete
  2. I did get the parts from DX. The details are here:
    http://www.endless-sphere.com/forums/viewtopic.php?f=2&t=13479

    I will mount the lights on a steel or aluminum bar in the final configuration. The challenge will be to find a waterproof or resistant case.

    ReplyDelete